| |
|
| Surface preparation |
 |
| |
|
| |
| Application |
|
| |
Make sure that the plaster has been allowed to dry for 24 hours minimum. Liberally apply a first coat of Durawax using a cloth, sponge or roller. Wipe off any drips or runs as you go. Within a few minutes, using a cloth moistened with a little wax in one hand and a dry cloth in the other, first wipe the damp cloth onto around ¼ m2 at a time to remove the swirl marks, and then polish with the dry cloth. Dark patches will disappear as the wax dries. Leave the Aquawax to dry for 1-2 hours and buff with a mechanical buffer to enhance the surface shine. |
|
|
|
Прикоснись к совершенству
