| |
|
     
| Surface preparation |
 |
| |
Substrates should be perfectly dry and dust-free. Exfoliated coatings should be removed, dirty areas smoothed and degreased. Treat the substrate with «Musson» or «Clavel Fix» impregnation. Stabilize by means of «Musson» impregnation and multi-purpose «Suprim 100» priming. |
| |
| Application |
|
| |
Accent decorative coating contains water based Accent Premiere priming (white or colored) and matt Accent finish coating.
Accent Premiere is ready for use. Apply with roller in 1-2 layers. Second layer is to be applied no sooner than in 4 hours after the first one.
Application of Accent
Before you apply the material, carry out coloration of the finish Accent coating with «PurÑolor» colorants.
Attention!!! – never stir Accent mechanically in order to eliminate destruction of white particles in the base.
The product is ready for use and is normally applied with a brush. It is advisable to work through small areas 1-2 m2 each. Strokes should be short and overlapping. After the coating has dried a little getting matt whereas the particles – a bit moist and shiny (in 5-10 minutes, depending on air temperature and humidity), protract white particles with flexible plastic palette knife keeping it nearly in parallel with the surface to emphasize characteristic Accent texture.
The final drying of the surface occurs in 24 hours.
|
|
|
|
