| |
|
    
| Surface preparation |
 |
| |
The substrate must be perfectly dry, dust-free, with no humidity and salts stains.
New plastered substrates are to be matured for 4 weeks for neutralizing, then processed with Clavel-Fix impregnation. The substrate thereafter is smoothed by means of a filling. After full drying the substrate is processed with the priming – Suprim Granitee impregnation, with prior 20% dilution with clean water
|
| |
| Application |
|
| |
Marmorella stellare lime plaster is ready for use, and therefore does not require any water dilution. If necessary, tint with PurColor colorants prior to applying. Mix until homogeneous paste. For mixing, you may use a special drill nozzle or do it manually. Substrate should be moist enough in the course of application. Marmorella stellare is applied in two coats with a stainless steel trowel. It is recommended to wait 8 hours after the 1st coat. The finish coating should be smoothed down by pressing a stainless steel trowel at angle of 45°.
Do not apply in rainy weather or at air/substrate temperature below 5° C.
Protect the facades from rain, at least along the first 48 hours, i.e. until lime has finished to set and started to harden.
|
|
|
|
Прикоснись к совершенству
