| |
|
         
| Surface preparation |
 |
| |
Before applying venetian plaster Veneto make certain that the surface is dry, clean and free of peeling parts; in case of very absorbent or powdery surfaces (gypsum bases, old crumbling plaster, etc.), treat them with an appropriate insulator.
In order to prepare the non-uniform walls proceed with the application of the transpiring base Suprim-100 or of the high-coverage base Suprim-200, in interior surfaces, in order to uniform the absorption and guarantee the correct adhesion of venetian plaster even in flat surfaces.
In presence of coarse plasters or very rough surfaces, apply the marmorino Marmorella as filler base.
|
| |
| Application |
|
| |
The venetian plaster is supplied white in 25 Kg pails.
In order to obtain colors of Veneto catalogue tventy Purcolor A tinting dozes are used; they are supplied in 75 ml jars.
As indicated in catalogue add Purcolor to Veneto and mix with a drill until a homogeneous colour is achieved.
Apply venetian plaster with a stainless steel spatula in two or more coats.
In order to obtain the glossy effect, pass the steel spatula repeatedly over the last coat before it has completely dried.
To make this easier, apply the last coat when the previous one has not yet completely dried (fresh on fresh).
Furthermore, in order to prevent that the joints should be visible, interrupt the application next to stringcourses and corners.
|
|
|
|
